Diameter Maintenance and D. Sun Extensions (DIME) Alcatel-Lucent Internet-Draft February 17, 2008 Intended status: Informational Expires: August 20, 2008 Diameter Policy Enforcement Interface: ITU-T Rw draft-sun-dime-itu-t-rw-00.txt Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on August 20, 2008. Copyright Notice Copyright (C) The IETF Trust (2008). Sun Expires August 20, 2008 [Page 1] Internet-Draft ITU-T Rw February 2008 Abstract This document describes the need for a new pair of IANA Diameter Command Codes and a new vendor-specific Application ID to be used in a vendor-specific new application, namely for the ITU-T Rec. Q.3303.3 - Rw interface used to send a request/responses for controlling the policy enforcement in a network element, as one of the recommendations of the International Telecommunication Union - Telecommunication Standardization Sector (ITU-T). Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. Diameter Policy Enforcement Interface ITU-T Rw . . . . . . . . 5 4. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 6 4.1. Application Identifier . . . . . . . . . . . . . . . . . . 6 4.2. Command Codes . . . . . . . . . . . . . . . . . . . . . . 6 4.3. AVP Codes . . . . . . . . . . . . . . . . . . . . . . . . 6 5. Security Considerations . . . . . . . . . . . . . . . . . . . 7 6. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 8 7. References . . . . . . . . . . . . . . . . . . . . . . . . . . 9 7.1. Normative References . . . . . . . . . . . . . . . . . . . 9 7.2. Informative References . . . . . . . . . . . . . . . . . . 9 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 10 Intellectual Property and Copyright Statements . . . . . . . . . . 11 Sun Expires August 20, 2008 [Page 2] Internet-Draft ITU-T Rw February 2008 1. Introduction This document summarizes the use of Diameter codes in a newly defined realization of a specification for controlling the policy enforcement. A new pair of Command Codes and a new vendor-specific Application ID are requested to be assigned by IANA. The document summarizes the uses of newly defined Diameter codes (Command Codes, AVP, vendor-specific application id). When combined with the Diameter Base protocol, this application's specification [Q.3303.3] satisfies the requirements of [Y.2111] of the International Telecommunication Union - Telecommunication Standardization Sector (ITU-T) to send a request and receiving a response for controlling the policy enforcement. The Diameter realization of this application assumes the use of Diameter Base protocol, as per RFC 3588, and extends it only for a specific application using a vendor-id (ITU-T), a vendor-specific application ID (TBD), a new Command Code (TBD), and new AVPs defined in the vendor-specific namespace. Sun Expires August 20, 2008 [Page 3] Internet-Draft ITU-T Rw February 2008 2. Terminology The base Diameter specification [RFC3588] Section 1.4 defines most of the terminology used in this document. Additionally, the terms and acronyms defined in Section 4 of [Q.3303.3] are used in this document. Sun Expires August 20, 2008 [Page 4] Internet-Draft ITU-T Rw February 2008 3. Diameter Policy Enforcement Interface ITU-T Rw The detailed descriptions of the Diameter Policy Enforcement interface ITU-T Rw can be found in Section 5 of the [Q.3303.3]. Sun Expires August 20, 2008 [Page 5] Internet-Draft ITU-T Rw February 2008 4. IANA Considerations This section provides guidance to the Internet Assigned Numbers Authority (IANA) regarding registration of values related to the Diameter protocol, in accordance with BCP 26 [RFC2434]. This document defines values in the namespaces that have been created and defined in the [RFC3588]. The IANA Considerations section of that document details the assignment criteria. Values assigned in this document, or by future IANA action, must be coordinated within this shared namespace. 4.1. Application Identifier IANA is requested to allocate a vendor-specific application ID for the application [Q.3303.3] using the next value from the 16777216- 4294967294 range. Registry: ID values Name Reference ---------------------------------------------- to be assigned ITU-T Rw Section 3 4.2. Command Codes IANA is requested to allocate command code values for the following commands defined in Section 7.4 of [Q.3303.3] from the Command Code namespace defined in [RFC3588]. Registry: Code Value Name Reference ------------------------------------------------------------- to be assigned Policy-Install-Request (PIR) Section 7.4.1 to be assigned Policy-Install-Answer (PIA) Section 7.4.2 4.3. AVP Codes The values 1010~1018 are assigned by ITU-T to the following AVPs within the ITU-T vendor-ID 11502 namespace: PI-Request-Type AVP, PI- Request-Number AVP, Traffic-Descriptor-UL AVP, Traffic-Descriptor-DL AVP, Maximum-Burst-Size AVP, Committed-Data-Rate AVP, Committed- Burst-Size AVP, Excess-Burst-Size, Removal-Cause AVP. See Table 1/Q.3303.3 in Section 7.3.1 of [Q.3303.3] for the detailed information of AVP codes, value type and flag rules. Sun Expires August 20, 2008 [Page 6] Internet-Draft ITU-T Rw February 2008 5. Security Considerations This document describes the Diameter Policy Enforcement Application. It builds on top of the Diameter Base protocol and the same security considerations described in [RFC3588] are applicable to this document. No further extensions are required beyond the security mechanisms offered by [RFC3588]. Sun Expires August 20, 2008 [Page 7] Internet-Draft ITU-T Rw February 2008 6. Acknowledgements The author would like to thank Dan Romascanu, Hannes Tschofenig and Tina Tsou for their help and support. Finally, the author would like to thank Alcatel-Lucent, as most of the effort put into this document was done while he was in their employ. Sun Expires August 20, 2008 [Page 8] Internet-Draft ITU-T Rw February 2008 7. References 7.1. Normative References [Q.3303.3] ITU-T Recommendation Q.3303.3, "Resource control protocol no. 3 (rcp3): Protocol at the Rw interface between the Policy Decision Physical Entity (PD-PE) and the Policy Enforcement Physical Entity (PE-PE): Diameter", 2008. [RFC3588] Calhoun, P., Loughney, J., Guttman, E., Zorn, G., and J. Arkko, "Diameter Base Protocol", RFC 3588, September 2003. 7.2. Informative References [RFC2434] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 2434, October 1998. [Y.2111] ITU-T Recommedation Y.2111, "Resource and admission control functions in Next Generation Networks", September 2006. Sun Expires August 20, 2008 [Page 9] Internet-Draft ITU-T Rw February 2008 Author's Address Dong Sun Alcatel-Lucent 600 Mountain Ave Murray Hill, NJ 07974 USA Phone: +1 908 582 2617 Email: dongsun@alcatel-lucent.com Sun Expires August 20, 2008 [Page 10] Internet-Draft ITU-T Rw February 2008 Full Copyright Statement Copyright (C) The IETF Trust (2008). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgment Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA). Sun Expires August 20, 2008 [Page 11]